IOGUARD SAN 제품은 멀티미디어/빅데이터/AI 프로세싱 작업에 최적화 되어 있는 스토리지 제품으로 Fibre 16Gbps, 40G/56G Ethernet 기반의 고속의 읽기 쓰기 성능을 제공하며, 초고용량 레이드 볼륨 제공을 통해서 성능및 가격,용량의 문제를 해결해 드릴수 있는 맞춤형 SAN 스토리지 장비입니다. 디스크 기반 스토리지와 플래쉬 기반 스토리지를 제공합니다.
 MODELS Fibre Channel Disk Array Fibre Channel Flash Array


• Disk Interface : Fibre-to-SAS HDD
• Host Interface : 2/4 x 16Gb/s Fibre channels
• RAID Level :
  RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD
  Multiple RAID selection,Configurable stripe size up to 1024KB

• Disk Interface : Fibre-to-SAS SSD/NVMe
• Host Interface : 2/4 x 16Gb/s Fibre channels, 10G Ethernet
• RAID Level :
  All-Flash, Hybrid, or All-Disk pools
  RAID 10, N+1, N+2, N+3
• Data Management :
  Unlimited snapshots & clones
  Unlimited file system size
  High performance inline data reduction
  Thin provisioning
  Storage Quality of Service
  Snapshot based Scheduled Replication
  Continuous Asynchronous Replication

 Features Description
Controller Architecture • Dual core RAID-on-Chip (ROC) 1.2GHz processor
• One 204-pin SO-DIMM socket for 2GB (default) DDR3-1600, 1RX8/2RX8, ECC module
- up to 4GB or 8GB DDR3-1600, 1RX8/2RX8, Unbuffered/ Registered ECC module
• Dual downstream SFF-8644 expansion ports (8 x12Gb/s) per controller
• Supports up to 512 12Gb/s SAS or 6Gb/s and 3Gb/s SAS/SATA HDDs/SSD, using 12Gb/s SAS JBOD
• Redundant controller operation with active/active and fail-over/ fail-back function
• Dual-active RAID controller with cache mirroring through dedicated high speed bus
• Advanced configuration for video optimized performance settings
• Support flash-based or battery backup module (FBM/BBM) ready (optional)
RAID Features • RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single D isk or JBOD
• Automatic drive failover and detection and rebuild using multiple Global, D edicated or Enclosure hot-spare drives
• Multiple RAID 0 and RAID 10(1E) support (RAID 00 and RAID 100)
• Multiple pairs SSD/HDD disk clone function
• SSD automatic monitor clone support
• SED (Self-encrypting drives) function support
• Support for native 4K and 512 byte sector devices
• Support HDD firmware update
• Automatic synchronization of firmware version in the dual-active mode
• Multi-path & load-balancing support
• Hot-swap and redundant components for increasing availability
Drive Interface • Up to 512 12Gb/s SAS or 6Gb/s and 3Gb/s SAS/SATA HDDs/ SSD, using 12Gb/s SAS JBOD
• Dual downstream SFF-8644 (4 x 12Gb/s) expansion ports (8 x 12Gb/s) per controller
Host Interface • Fibre-to-SAS 2/4 x 16Gb/s Fibre channels
Power Supply • Dual 200W hot swap and redundant with PFC, N+1 design
• AC voltage: 110V@40A, 230V@80A for input inrush current with PFC (auto-switching)
• Supports 90-264 VAC input at 47-63 Hz frequency
Dimensions 1U 19-inch rackmount chassis (H x W x D)
• Without handles: 43.5 x 445 x 400 mm (1.7 x 17.5 x 15.7 in)
• With handles: 43.5 x 482 x 436 mm (1.7 x 22.9 x 17.1 in)
Weight • Single: 27 kg (59.5 lb)
• Dual: 28 kg (61.7 lb)

 Features Description
Data Management Unlimited snapshots & clones
Unlimited file system size
High performance inline data reduction
Thin provisioning
Storage Quality of Service
Snapshot based Scheduled Replication
Continuous Asynchronous Replication
RAID Level All-Flash, Hybrid, or All-Disk pools
RAID 10, N+1, N+2, N+3
Host Interface • Fibre-to-SAS 2/4 x 16Gb/s Fibre channels •10/40/56GbE Network Interface
Disk Interface up to 24x hot-swap 2.5”SAS/SATA(SSD)
NVMe:up to 16 hot-swap 2.5”NVMe
CPU 1 or 2 Intel® Xeon® Scalable Processors with LGA3647 socket, support OPA CPU (Up to TDP 165W, optional TDP 205W)
Chipset Intel® PCH server C621 series chipset
Memory DDR4 ECC RDIMMs/LRDIMMs server memory, Memory Frequency 1866/2133/2400/2666MHz 12x DDR4 Channel, each Channel has 2x DIMM, 24x DDR4 slot totally Support 8GB, 16GB, 32GB, 64GB, 128GB, up to 3.0TB (M processors)
Power Supply Platinum Level 550W、800W、1300W hot-swap redundant CRPS, optional
support 240 and 338 VDC PSU
Dimension Width 17.5" (445mm)
Height 3.42" (87mm)
Depth 31.8" (808mm)